Water-cooled DC Support Capacitor

FOB Price: Usono $ 0.5 - 9.999 / Peco

Min.Order Kvanto: 100 Pecaj / Pecoj

Provizo Kapableco: 10000 Pecaj / Pecoj por Monato

Pordo: Ningbo / Ŝanhajo

Pago Kondiĉoj: L / C, D /, D / P, T / T

Sendu retpoŝton al ni Elŝuti kiel PDF

produkto Detalo

produkto Etikedoj

PRODUCT OVERVIEW AND WORKING CONDITIONS

◆Electric heating capacitors are mainly used in induction heating systems to improve power factor or improve loop characteristics. The performance of our products meets the requirements of GB/T 3984.1-2004 “Power Capacitors for Induction Heating Devices”.

◆ Indoor installation, the altitude does not exceed 1000m.

◆The installation site has no severe mechanical vibration, no harmful gases and vapors, and explosive dust.

◆The cooling water inlet temperature does not exceed 30 °C. For capacitors below 1000kvar, the water flow rate is not less than 4L/min, and 1000kvar and above is not less than 6L/min.

◆Long-term over-voltage (no more than 4 hours in 24 hours) does not exceed 1.1UN, and long-term overcurrent (including harmonic current) does not exceed 1.35IN.

FEATURES

◆Pressure protection, stable quality and high cost performance.

◆The bushing is conductive or grounded, safer.

◆Environmental protection medium: NO PCB.

◆F ull water cold, semi-water cooled.

TECHNICAL PARAMETERS

Capacity deviation	±5%, the ratio of the maximum value to the minimum value of each equal group capacitance is not more than 1.1
Dielectric loss tangent tan δ	Rated voltage Un, at 20 ° C Un≤1KV: tanδ≤0.0015 Un>1KV: tan δ≤0.0012
Dielectric strength	Can withstand 1kv power frequency test voltage between terminal and housing for 1min
Altitude	<1000m, indoor installation
Environment humidity:	≤85%
Temperature range:	+5°C~+50°C
Capacity deviation:	±10%;
Protection level:	IP00, indoor installation;
Cooling water:	The flow rate below Qn<1000kvar is not less than 4L/min, the flow rate above Qn≥1000kvar is not less than 6L/min, and the outlet water temperature is ≤30°C;
Installation location:	No severe mechanical vibration, no harmful gases and vapors, no conductive dust
Product over-voltage	(not more than 4 hours in 24 hours) does not exceed 1.1Un, long-term over current (including harmonic current) does not exceed 1.3In
Standard	GB/T 3984(IEC60110)；